串列埠接收
串列埠傳送private
long receive_count =0;
//接收位元組計數
public
static
serialport serialport1 =
newserialport()
;public
static
stringbuilder sb =
newstringbuilder()
;//為了避免在接收處理函式中反覆呼叫,依然宣告為乙個全域性變數
public
form1()
///
/// 資料接收事件
///
///
///
public
void
serialport1_datareceived
(object sender,
serialdatareceivedeventargs e)
// throw new notimplementedexception();
//int num = serialport1.bytestoread;//獲取接收緩衝區的位元組數
//byte receive_buf = new byte[num];//宣告乙個大小為num的位元組資料用於存放讀出的byte型資料
0, num);//讀取接收快取區num的位元組數
sb.clear()
;//防止出錯,首先清空字串構造器
if(checkboxshowtime.checked)))
;}if(radiobuttonreceiveascii.checked)
else
if(radiobuttonreceivehex.checked)
try));
}catch
(exception ex)
}///
/// 開啟/關閉串列埠
///
///
///
private
void
buttonopen_click
(object sender,
eventargs e)
else
else
serialport1.
open()
;}}catch
(exception ex)
}}
public
void
send
(textbox textbox)
else serialport1.
writeline
(text)
;
showtext.
(text);}
else
if(radiobuttonsendhex.checked)
else
}else
foreach
(byte b in byteshex)
//if (textboxsend1.text.length % 2 != 0)//輸入的是奇數需單獨處理//}
串列埠傳送和接收訊息
stm32f4開發板搭載乙個usb串列埠,2個rs232串列埠,部落格內容介紹usb串列埠和電腦通訊 步驟 1 串列埠和io口使能 rcc apb2periphclockcmd rcc apb2periph usart1,enable rcc ahb1periphclockcmd rcc ahb1p...
C 串列埠通訊,串列埠的傳送與接收,獲取本機串列埠
serialport 串列埠類 1.引用命名空間 using system.io.ports 2.建立物件 serialport com new serialport 3.給串列埠埠與波特率屬性賦值 com.portname com4 com.baudrate 9600 4.開啟串列埠 com.op...
串列埠傳送接收浮點型資料
最近正在除錯nrf24l01無線通行模組,由於要fpga與pc機相互通訊,pc機沒spi,所以要個開發板 資料傳輸流程如下 上位機 串列埠 arm開發板 spi nrf24l01 另乙個nrf24l01 spi fpga開發板。其中遇到乙個頭疼的問題是傳輸的都是浮點型數,但傳送接受的是unsigne...