centos7核心引數優化配置詳解

2021-08-17 01:46:03 字數 2702 閱讀 2890

#關閉ipv6

net.ipv6.conf.all.disable_ipv6 = 1

net.ipv6.conf.default.disable_ipv6 = 1

net.ipv4.icmp_echo_ignore_broadcasts = 1

net.ipv4.icmp_ignore_bogus_error_responses = 1

#關閉路由**

net.ipv4.ip_forward = 0 開起路由**將0改為1即可

net.ipv4.conf.all.send_redirects = 0

net.ipv4.conf.default.send_redirects = 0

#開啟反向路徑過濾

net.ipv4.conf.all.rp_filter = 1

net.ipv4.conf.default.rp_filter = 1

#處理無源路由的包

net.ipv4.conf.all.accept_source_route = 0

net.ipv4.conf.default.accept_source_route = 0

#關閉sysrq功能

kernel.sysrq = 0

#core檔名中新增pid作為副檔名

kernel.core_uses_pid = 1

net.ipv4.tcp_syncookies = 1

表示開啟syn cookies。當出現syn等待佇列溢位時,啟用cookies來處理,可防範少量syn攻擊,預設為1,表示開啟的;

表示syn佇列的長度,預設為1024,加大佇列長度為8192,可以容納更多等待連線的網路連線數

net.ipv4.tcp_max_syn_backlog = 262144

#修改訊息佇列長度

kernel.msgmnb = 65536

kernel.msgmax = 65536

#設定最大記憶體共享段大小bytes

kernel.shmmax = 68719476736

kernel.shmall = 4294967296

#timewait的數量,預設180000

net.ipv4.tcp_max_tw_buckets = 6000

net.ipv4.tcp_sack = 1

net.ipv4.tcp_window_scaling = 1

net.ipv4.tcp_rmem = 4096  87380   4194304 tcp讀buffer,可參考的優化值: 32768 436600 873200

net.ipv4.tcp_wmem = 4096  16384   4194304 tcp寫buffer,可參考的優化值: 8192 436600 873200

net.core.wmem_default = 8388608 tcp寫buffer的預設值

net.core.rmem_default = 8388608 tcp讀buffer的預設值

net.core.rmem_max = 16777216 tcp寫buffer的最大值

net.core.wmem_max = 16777216 tcp寫buffer的最大值

#每個網路介面接收資料報的速率比核心處理這些包的速率快時,允許送到佇列的資料報的最大數目

net.core.netdev_max_backlog = 262144

#限制僅僅是為了防止簡單的dos 攻擊

net.ipv4.tcp_max_orphans = 3276800

#未收到客戶端確認資訊的連線請求的最大值

net.ipv4.tcp_max_syn_backlog = 262144

net.ipv4.tcp_timestamps = 0

#核心放棄建立連線之前傳送synack 包的數量

net.ipv4.tcp_synack_retries = 1

#核心放棄建立連線之前傳送syn 包的數量

net.ipv4.tcp_syn_retries = 1

#啟用timewait 快速**

net.ipv4.tcp_tw_recycle = 1

#開啟重用。允許將time-wait sockets 重新用於新的tcp 連線

net.ipv4.tcp_tw_reuse = 1

net.ipv4.tcp_mem = 94500000 915000000 927000000

net.ipv4.tcp_fin_timeout = 1

#當keepalive 起用的時候,tcp 傳送keepalive 訊息的頻度。預設是2 小時

net.ipv4.tcp_keepalive_time = 30

#允許系統開啟的埠範圍

net.ipv4.ip_local_port_range = 1024    65000

#修改防火牆表大小,預設65536

#net.netfilter.nf_conntrack_max=655350

#net.netfilter.nf_conntrack_tcp_timeout_established=1200

net.ipv4.conf.all.accept_redirects = 0

net.ipv4.conf.default.accept_redirects = 0

net.ipv4.conf.all.secure_redirects = 0

centos7優化核心引數詳解

cat etc sysctl.conf ctcdn系統優化引數 關閉ipv6 net.ipv6.conf.all.disable ipv6 1 net.ipv6.conf.default.disable ipv6 1 避免放大攻擊 net.ipv4.icmp echo ignore broadcas...

centos7優化核心引數詳解

centos7優化核心引數詳解 原文 cat etc sysctl.conf ctcdn系統優化引數 關閉ipv6 net.ipv6.conf.all.disable ipv6 1 net.ipv6.conf.default.disable ipv6 1 避免放大攻擊 net.ipv4.icmp e...

centos7核心優化

sysctl p 引數 sysctl settings are defined through files in usr lib sysctl.d run sysctl.d and etc sysctl.d vendors settings live in usr lib sysctl.d to o...