cat /etc/sysctl.conf
#ctcdn系統優化引數
#關閉ipv6
net.ipv6.conf.all.disable_ipv6 = 1
net.ipv6.conf.default.disable_ipv6 = 1
# 避免放大攻擊
net.ipv4.icmp_echo_ignore_broadcasts = 1
# 開啟惡意icmp錯誤訊息保護
net.ipv4.icmp_ignore_bogus_error_responses = 1
#關閉路由**
net.ipv4.ip_forward = 0
net.ipv4.conf.all.send_redirects = 0
net.ipv4.conf.default.send_redirects = 0
#開啟反向路徑過濾
net.ipv4.conf.all.rp_filter = 1
net.ipv4.conf.default.rp_filter = 1
#處理無源路由的包
net.ipv4.conf.all.accept_source_route = 0
net.ipv4.conf.default.accept_source_route = 0
#關閉sysrq功能
kernel.sysrq = 0
#core檔名中新增pid作為副檔名
kernel.core_uses_pid = 1
# 開啟syn洪水攻擊保護
net.ipv4.tcp_syncookies = 1
#修改訊息佇列長度
kernel.msgmnb = 65536
kernel.msgmax = 65536
#設定最大記憶體共享段大小bytes
kernel.shmmax = 68719476736
kernel.shmall = 4294967296
#timewait的數量，預設180000
net.ipv4.tcp_max_tw_buckets = 6000
net.ipv4.tcp_sack = 1
net.ipv4.tcp_window_scaling = 1
net.ipv4.tcp_rmem = 4096 87380 4194304
net.ipv4.tcp_wmem = 4096 16384 4194304
net.core.wmem_default = 8388608
net.core.rmem_default = 8388608
net.core.rmem_max = 16777216
net.core.wmem_max = 16777216
#每個網路介面接收資料報的速率比核心處理這些包的速率快時，允許送到佇列的資料報的最大數目
net.core.netdev_max_backlog = 262144
#限制僅僅是為了防止簡單的dos 攻擊
net.ipv4.tcp_max_orphans = 3276800
#未收到客戶端確認資訊的連線請求的最大值
net.ipv4.tcp_max_syn_backlog = 262144
net.ipv4.tcp_timestamps = 0
#核心放棄建立連線之前傳送synack 包的數量
net.ipv4.tcp_synack_retries = 1
#核心放棄建立連線之前傳送syn 包的數量
net.ipv4.tcp_syn_retries = 1
#啟用timewait 快速**
net.ipv4.tcp_tw_recycle = 1
#開啟重用。允許將time-wait sockets 重新用於新的tcp 連線
net.ipv4.tcp_tw_reuse = 1
net.ipv4.tcp_mem = 94500000 915000000 927000000
net.ipv4.tcp_fin_timeout = 1
#當keepalive 起用的時候，tcp 傳送keepalive 訊息的頻度。預設是2 小時
net.ipv4.tcp_keepalive_time = 30
#允許系統開啟的埠範圍
net.ipv4.ip_local_port_range = 1024 65000
#修改防火牆表大小，預設65536
#net.netfilter.nf_conntrack_max=655350
#net.netfilter.nf_conntrack_tcp_timeout_established=1200
# 確保無人能修改路由表
net.ipv4.conf.all.accept_redirects = 0
net.ipv4.conf.default.accept_redirects = 0
net.ipv4.conf.all.secure_redirects = 0
net.ipv4.conf.default.secure_redirects = 0
centos7優化核心引數詳解
centos7優化核心引數詳解 原文 cat etc sysctl.conf ctcdn系統優化引數 關閉ipv6 net.ipv6.conf.all.disable ipv6 1 net.ipv6.conf.default.disable ipv6 1 避免放大攻擊 net.ipv4.icmp e...
centos7核心引數優化配置詳解
關閉ipv6 net.ipv6.conf.all.disable ipv6 1 net.ipv6.conf.default.disable ipv6 1 net.ipv4.icmp echo ignore broadcasts 1 net.ipv4.icmp ignore bogus error r...
centos7核心優化
sysctl p 引數 sysctl settings are defined through files in usr lib sysctl.d run sysctl.d and etc sysctl.d vendors settings live in usr lib sysctl.d to o...