華為交換機抓包分析
利用debugging檢視資訊
在使用者檢視下操作:
www.2cto.com
1、在超級終端上輸出
debugging ip packet #開啟除錯開關
terminal debugging #在使用者檢視開啟除錯輸出開關
然後別的裝置有針對交換的操作,交換機就把資訊輸出到超級終端上
2、在telnet終端上輸出
info-center monitor channel 0
<>terminal monitor #開啟顯示在終端上
<>terminal debugging
www.2cto.com
3、關閉debug資訊
<>undo debugging ip packet #關閉相應的報文
<>undo debugging all #關於全部debug資訊
<>undo terminal debugging #關閉除錯輸出開關
4、關閉telnet終端輸出資訊
undo info-center monitor channel
華為交換機做映象 抓包
在系統檢視下配置埠映象 先配置觀察埠 然後再進入需要映象的埠 在配置映象埠模式 quidway gigabitethernet0 0 23 port mirroring to observe port 1 both both,全部流量 inbound,入方向流量 outbound,出方向流量 配置完...
華為交換機映象抓包Quidway S3900
39系列交換機映象抓包配置方法 一 3900埠映象配置 步驟一 quidway mirroring group 1 local 說明 建立埠映象組 步驟二 quidway mirroring group 1 monitor port ethernet 1 0 22 說明 建立映象目的埠 22 備註將...
華為交換機配置時區 華為交換機配置命令
文件大全 華為交換機的基本操作命令 設定日期和時間 時間對於交換機來說非常重要,時間不對很多功能無法實現 clock timezone bj add 08 00 00 在使用者檢視下輸入此命令 clock datetime 13 45 30 2017 09 20 設定當前時間和日期,小時制syste...