lsw3的配置
[huawei]dis cu
vlan batch 10 20
stp instance 1 priority 4096 設定lsw3的例項1的優先順序低於lsw4 使其成為1的根
stp instance 2 priority 8192
cluster enable
ntdp enable
ndp enable
stp region-configuration
region-name huawei
revision-level 1
instance 1 vlan 10 設定例項1對映的vlan
instance 2 vlan 20
active region-configuration 啟用
inte***ce vlanif10
ip address 192.168.1.1 255.255.255.0
inte***ce vlanif20
ip address 192.168.2.1 255.255.255.0
inte***ce meth0/0/1
inte***ce gigabitethernet0/0/1
port link-type trunk
port trunk allow-pass vlan 10 20
stp instance 2 cost 40000 配置例項2的開銷值大於預設的 使其成為堵塞埠
inte***ce gigabitethernet0/0/2
port link-type trunk
port trunk allow-pass vlan 10 20
lsw4的配置
[huawei]dis cu
sysname huawei
vlan batch 10 20
stp instance 1 priority 8192
stp instance 2 priority 4096
cluster enable
ntdp enable
ndp enable
drop illegal-mac alarm
diffserv domain default
stp region-configuration
region-name huawei
revision-level 1
instance 1 vlan 10
instance 2 vlan 20
active region-configuration
inte***ce gigabitethernet0/0/1
port link-type trunk
port trunk allow-pass vlan 10 20
stp instance 1 cost 40000
inte***ce gigabitethernet0/0/2
port link-type trunk
port trunk allow-pass vlan 10 20
檢視埠情況
[huawei] dis stp brief
mstid port role stp state protection
0 gigabitethernet0/0/1 desi forwarding none
0 gigabitethernet0/0/2 desi forwarding none
0 gigabitethernet0/0/3 desi forwarding none
0 gigabitethernet0/0/4 desi forwarding none
1 gigabitethernet0/0/1 desi forwarding none
1 gigabitethernet0/0/2 desi forwarding none
2 gigabitethernet0/0/1 alte discarding none
2 gigabitethernet0/0/2 root forwarding none
[huawei]dis stp instance 1
-------[msti 1 global info]-------
msti bridge id :4096.4c1f-cc26-6bc6
msti regroot/irpc :4096.4c1f-cc26-6bc6 / 0
msti rootportid :0.0
master bridge :32768.4c1f-cc26-6bc6
cost to master :0
tc received :6
tc count per hello :0
time since last tc :0 days 23h:6m:26s
number of tc :8
last tc occurred :gigabitethernet0/0/2
----[port1(gigabitethernet0/0/1)][forwarding]----
port role :designated port
port priority :128
port cost(dot1t ) :config=auto / active=20000
designated bridge/port :4096.4c1f-cc26-6bc6 / 128.1
port times :remhops 20
tc or tcn send :3
tc or tcn received :2
----[port2(gigabitethernet0/0/2)][forwarding]----
port role :designated port
port priority :128
port cost(dot1t ) :config=auto / active=20000
designated bridge/port :4096.4c1f-cc26-6bc6 / 128.2
port times :remhops 20
tc or tcn send :2
tc or tcn received :2
[huawei]display stp inte***ce gigabitethernet 0/0/3
-------[cist global info][mode mstp]-------
cist bridge :32768.4c1f-cc26-6bc6
config times :hello 2s maxage 20s fwdly 15s maxhop 20
active times :hello 2s maxage 20s fwdly 15s maxhop 20
cist root/erpc :32768.4c1f-cc26-6bc6 / 0
cist regroot/irpc :32768.4c1f-cc26-6bc6 / 0
cist rootportid :0.0
bpdu-protection :disabled
tc or tcn received :29
tc count per hello :0
stp converge mode :normal
time since last tc :0 days 2h:10m:14s
number of tc :51
last tc occurred :gigabitethernet0/0/4
----[port3(gigabitethernet0/0/3)][forwarding]----
port protocol :enabled
port role :designated port
port priority :128
port cost(dot1t ) :config=auto / active=20000
designated bridge/port :32768.4c1f-cc26-6bc6 / 128.3
port edged :config=default / active=disabled
point-to-point :config=auto / active=true
transit limit :147 packets/hello-time
交換機交換機
交換機。常常聽人說交換機 路由器。什麼是交換機?為什麼叫交換機?交換什麼?交換機是不是就是路由器?這二者有什麼區別?這是我的疑問。沒辦法,基礎沒打好。一 什麼是交換機 交換機是這麼一種裝置 將網路分成若干小段,以解決網路擁堵,降低出錯,提高傳輸效率。為什麼分成若干小段可以提高傳輸效率呢?這涉及到網路...
接入交換機,匯聚交換機,核心交換機
通常將網路中直接面向使用者連線或訪問網路的部分稱為接入層,將位於接入層和核心層之間的部分稱為分布層或匯聚層。接入交換機一般用於直接連線電腦,匯聚交換機一般用於樓宇間。匯聚相對於乙個區域性或重要的中轉站,核心相當於乙個出口或總彙總。原來定義的匯聚層的目的是為了減少核心的負擔,將本地資料交換機流量在本地...
交換機分布快取 核心交換機PK普通交換機
核心交換機我們平時提的挺多,那麼他與普通交換機到底有什麼區別的呢,今天我們一起來了解下。一 埠的區別 普通交換機埠數量一般為24 48個,網口大部分為千兆乙太網或者百兆乙太網口,主要功能用於接入使用者資料或者匯聚一些接入層的交換機資料,這種交換機最多可以配置vlan簡單路由協議和一些簡單的snmp等...