中途遇到問題：
adb 版本太老會報異常，
error: failed to load 'image-taimen-': not enough space
沒有userdata.img
finished. total time: 0.004s
extracting android-info.txt (0 mb) to ram...
extracting boot.img (40 mb) to disk... took 0.734s
target reported max download size of 536870912 bytes
archive does not contain 'boot.sig'
archive does not contain 'boot_other.img'
extracting dtbo.img (8 mb) to disk... took 0.037s
archive does not contain 'dtbo.sig'
archive does not contain 'dt.img'
archive does not contain 'recovery.img'
extracting system.img (1866 mb) to disk... took 30.433s
archive does not contain 'system.sig'
extracting system_other.img (590 mb) to disk... took 7.949s
archive does not contain 'system.sig'
extracting vbmeta.img (0 mb) to disk... took 0.004s
archive does not contain 'vbmeta.sig'
extracting vendor.img (341 mb) to disk... took 5.873s
archive does not contain 'vendor.sig'
archive does not contain 'vendor_other.img'
wiping userdata...
createprocess failed: 緋葷粺鎵句笉鍒版寚瀹氱殑鏂囦歡銆?(2)
error: cannot generate image for userdata
press any key to exit...
解決方案：
將image-taimen-opm-*** 解壓出來，
分別fastboot flash 進去
如下，fastboot flash system system.img
重啟幾次即可。
Android 刷機教程
2 刷入recovery 第一步 第二步 第三步 這個時候，就需要把手機進入到fastboot模式，將手機關機，同時按住音量下 電源鍵 即可進入到fastboot模式，相信部分發燒友對這個模式非常熟悉吧 當手機出現下面這個樣子後，就代表已經進入到fastboot模式了。第四步 將已經進入到fastb...
Jetson NX刷機教程
1.開機，選擇english，設定賬號密碼，一直continue即可 2.配置cuda路徑，換源，安裝pip3等 1 已經安裝cuda但檢視版本時顯示 nvcc command not found 解決方法 新增環境變數，開啟 bashrc 新增環境變數如下 sudo vi bashrc 開啟 ba...
Nexus Root Toolkit教程 刷機
nexus root toolkit是nexus系列裝置專屬解鎖 root 刷機 修復工具。本教程以nexus7二代刷安卓5.0 lollipop系統為例項演示刷機過程。安卓5.0刷機教程 nexus root toolkit 刷機 nexus刷機 刷機前必須將nexus裝置解鎖，否則無法用nexu...